All products Continuous production · built to order

Catenary Shot Blasting Machine (Overhead Conveyor)

Parts hang from an overhead monorail and pass through the blast chamber without ever touching each other or a belt. The conveyor does not stop for the blast: it runs at a set speed, the chamber blasts whatever is inside it at that moment, and the parts come out at the other end ready for the next station.

What it is for

This is the machine you buy when the parts are too heavy or too easily marked to tumble, and the volume is high enough that stopping to load a batch would waste the shift. Castings, forgings, welded assemblies, structural brackets, and anything that will hang from a hook without deforming.

The second reason is the layout. A catenary line can be joined directly to a paint or powder line: the same hook that carried the part through the blast chamber carries it into the booth. That removes a loading and unloading step, and with it the handling damage that goes with it.

The trade you are making

A continuous line has no batch: it has a speed. Everything downstream — how many hooks, how much load per hook, how long the chamber is — is set by the parts per hour you need and the cycle time the surface grade requires. Change the part mix and you change the speed, not the machine.

That is also its limitation. If your production is batch work with frequent changeovers, a catenary line will sit idle between runs; a hook machine with two stations will do the same job for less.

What sets the specification

  • Parts per hour and hook spacing — the two numbers that fix conveyor speed and chamber length.
  • Load per hook and part envelope — including the swing of a part that is not balanced on the hook.
  • Height available — an overhead conveyor needs headroom, and the return loop has to fit the building.
  • Downstream process — if the line feeds a paint booth, the conveyor and its hangers are usually designed with that booth in mind from the start.

How it is usually built

ConveyorOverhead monorail, variable-speed drive, with the return loop laid out to your building
HangersDesigned around the part — single hook, double hook or a custom fixture
Blast chamberEntry and exit with curtains or air seals to keep abrasive and dust inside
Abrasive circuitElevator, separator and screw conveyor sized to the number of wheels
IntegrationOptional interface to a paint or powder line so the part is not re-hung

Conveyor speed, chamber length and wheel count are calculated per line — we do not publish a single table, because two customers with the same part size rarely need the same throughput.

Questions buyers ask

Can it run different parts on the same line?
Yes, within the hook load and the envelope. What changes is the speed and sometimes the hanger; the chamber stays.
Do parts rotate as they pass?
They can — hangers that rotate the part expose all faces without slowing the line, which matters for castings with recesses.
What do you need to quote?
Parts per hour, part drawings with weight, available height for the conveyor loop, and whether the line feeds a paint process.

Related: hook type machines for batch work, which machine type fits your part.

Send the part and the rate

Parts per hour, weight and envelope, and the height you have — that is enough to lay out a line.

Get a quote

Related machines

Buyers weighing this machine usually compare it against these.