Technical Resources
Equipment Guides & Articles
In-depth technical guides to help you select, operate, and optimize your shot blasting equipment. Written by Yufei engineers with 10+ years of industry experience.

What Wears Out on a Shot Blasting Machine — and How You See It in the Finish
Machines rarely fail suddenly; they drift. Three signals — pattern drift, creeping cycle time, dust at the door — tell you which part is going, and four numbers turn maintenance into planning.
Read Article
Pre-Shipment Inspection: What to Check Before a Machine Leaves
The expensive failures happen between crating and commissioning. Eight checks — loaded run, your own sample, voltage test, braced parts, documents — and what to do if you cannot travel.
Read Article
SA 2.5 vs SA 3.0: What the Difference Actually Costs
One letter and half a number — but a different cycle time, a different abrasive bill and a different wear rate. What changes between the two grades, what they do not cover, and how to check them at acceptance.
Read Article
Which Shot Blasting Machine Do I Need? Four Types, and Where the Line Falls
Tumble belt, hook type, mesh belt or roller conveyor. The four types compared by part size, weight, fragility and throughput — including the mesh-versus-roller boundary buyers get wrong most often.
Read Article
Why We Don't Publish Shot Blasting Machine Prices — and How Wheel Count Follows Chamber Size
A machine is priced by configuration, not by model. Chamber width sets the wheel count — four wheels from 600 to 1,000 mm, six to 1,500, eight to 2,500 — and height, wheel power and wear zones set the rest.
Read Article
A Q376 Hook Type Machine in Kenya, Built for Motorcycle Parts and Welded Assemblies
Toprich, a powder coating plant in Kenya, blasts motorcycle frames and welded brackets to SA 2.5 on a Q376: 1500 × 1500 × 1800 mm chamber, two 7.5 kW wheels, a manganese hot zone, commissioned remotely from Botou.
Read Article
Shot Blasting Aluminium Without Damaging It: What to Specify
Aluminium is softer than the abrasive thrown at it. The five ways parts get damaged, the four specifications that prevent it, and the machine settings behind a real SA 3.0 aluminium project.
Read Article
A Q3740 in Surabaya: Blasting Aluminium Furniture Frames to SA 3.0 Before Painting
A European-owned furniture manufacturer in Surabaya needed aluminium frames blasted to SA 3.0 before painting. Four 11 kW turbines with individual VFDs, Schneider and Siemens electrics, two engineers on site for seven days.
Read Article
Q326 vs Q3210: Choosing the Right Tumble Belt Size, Not the Biggest One
200 kg or 600 kg per batch? A practical comparison for foundries and job shops — batch weight, loading cycles, three details buyers forget, and what customers in Switzerland, Sri Lanka and Russia actually found.
Read Article
Four Machines, Four Voltages: How We Configure Shot Blasting Machines for Global Power Grids
Four machines shipped to North America in one month — 220V, 415V, 480V and 600V. How we wire, test and deliver machines matched to your local power grid, and why a powder coating shop in Salt Lake City ordered twice.
Read Article
How to Choose a Shot Blasting Machine Supplier: 7 Checks That Actually Matter
Seven practical checks for buying a shot blasting machine from China — testing your own parts, voltage, stock models, shipping, installation — based on real projects in Sri Lanka, Russia, the US, Uzbekistan and beyond.
Read Article
Tumble Belt Shot Blasting Machines: The Full Model Range, and How Customers Actually Use Them
Q326 or Q3220? Real spec numbers, the two models we keep in stock, automatic door and Siemens PLC upgrades, and what customers in Sri Lanka, Russia, Mexico and Switzerland taught us.
Read Article
A 5-Meter Hook Machine for Uzbek Transformer Plants: Why Size Matters, and How We Delivered It in 7 Days
A transformer manufacturer in Uzbekistan needed to blast-clean housings up to 4 meters tall. See how a 3.2m chamber, twin 2t hoists, five turbines, and a modular shipping plan delivered a working machine in 7 days.
Read Article
Tumble Belt Shot Blasting Machine: Complete Selection Guide for Foundry & Forging Applications
How to choose the right tumble belt shot blasting machine for your production line. Covers Q326, Q3210, Q3215, and Q324 models — workpiece sizing, capacity planning, and application-specific configurations from Hebei Yufei Machinery.
Read Article
Hook Type Shot Blasting Machines: Heavy-Duty Surface Preparation for Large Castings & Steel Structures
Deep dive into the Q376–Q3750 hook type range: working envelopes from Φ1000 × 1000 mm to Φ2500 × 4000 mm, two to five blast turbines, and the fixturing that keeps complex castings and weldments turning evenly through the stream.
Read Article
Wire Mesh Belt Shot Blasting: Continuous Through-Feed Solutions for Plates, Profiles & Sheet Metal
Everything you need to know about QWD-series wire mesh belt blasting machines. Throughput optimization, part handling for thin materials, and multi-shift production configurations from Yufei.
Read Article
Roller Conveyor Shot Blasting Machines: Industrial-Scale Surface Preparation for Steel Plates & H-Beams
Complete technical reference for Q698–Q6940 roller conveyor blasting systems. Plate width analysis, multi-wheel abrasive coverage, and integration with automated production lines.
Read Article