All products Surface preparation · built to order

Mobile Road Surface Shot Blasting Machine

A self-propelled unit that drives over concrete or asphalt, blasts the surface, recovers its own abrasive and leaves a dust-free, profiled floor behind it. It is the machine you use when the floor is the workpiece — a warehouse slab, a runway apron, a bridge deck — rather than a part that goes into a cabinet.

What the machine actually does

The head travels across the surface inside a sealed housing. Abrasive is thrown down at the floor, the spent media and the removed material are picked up in the same pass, and the shot is cleaned and returned to the wheel. Because the circuit is closed, the process is dry and does not need water, slurry or a drying period before the next coat goes on.

That closed loop is what separates this from grinding or scarifying: you are removing a controlled fraction of a millimetre and leaving a uniform profile, not gouging the surface.

When a mobile unit beats a fixed machine

The deciding question is not the surface, it is whether the surface can be brought to the machine. A stationary roller conveyor or mesh belt machine needs the plate or profile to move through it. A floor cannot. Once the work is in place — car park decks, factory slabs before epoxy, airport aprons, ship decks — a self-propelled unit is the only option that does not involve dismantling the building.

The second case is scale: a large continuous area favours a machine that travels at a steady rate over it, because the pass is uniform and the operator is steering, not feeding.

What sets the specification

Every unit is built to the job, so the quotation comes from four numbers rather than a model name. These are what we ask for:

  • Working width — how much floor one pass covers; this is the single biggest driver of size and price.
  • Daily area — square metres per shift at the profile you need, which sets travel speed and the abrasive circuit.
  • Substrate and condition — new concrete, cured epoxy, thermoplastic road marking and old paint behave differently and change the media.
  • Dust regime — the collector is sized to the application, and on indoor work the filtration standard is usually the constraint on the whole machine.

How it is usually configured

DriveSelf-propelled, forward and reverse, with the blast head floating on the surface
Abrasive circuitClosed loop: blast, recover, clean, return — no water, no slurry
Dust controlOn-board collector sized to the application; indoor work is usually filtration-limited
MediaSelected to the substrate and the profile the next coating needs
OptionsEdge kit for working up to walls and kerbs, lighting, and remote control

Widths, travel speeds and cleaning rates are confirmed per project once the four numbers above are known — we do not publish a single sheet that would only be right for one site.

Questions buyers ask

Can it strip paint or road marking?
Yes — removal of coatings, thermoplastic marking and contaminated layers is one of the main uses. The pass count follows the coating thickness, not the machine.
Does it work indoors?
Yes, with the right filtration. The dust collector, not the blast head, is what decides whether an indoor site is feasible.
What do you need to quote?
Working area and daily target, substrate and coating, whether the work is indoor or outdoor, and the power available on site.

Related: which machine type fits your part, roller conveyor machines for plate and profiles.

Tell us the floor, not the model

Area, substrate, coating, indoor or outdoor — we will come back with a configuration and the dust regime that fits the site.

Get a quote

Related machines

Buyers weighing this machine usually compare it against these.