Shot Blasting and Oiling Line
Blasting leaves bare steel. Bare steel starts oxidising within hours in humid air — and a plate that was perfectly clean at the end of the line can be rust-flecked by the time it is stacked, stored or shipped. An oiling line closes that gap in the same pass.
Why the two steps belong together
Blast, then oil, in one line: the surface is protected before it is handled, and the second handling step — lifting clean plate onto another machine — disappears. On plate and sections that is usually the real saving, because the protection itself is cheap and the handling is not.
Doing them separately also means the plate is unprotected during transport between the two stations, which is exactly the window where condensation forms.
What the oiling stage actually is
A controlled film, not a flood. Rollers or spray nozzles apply a thin, even coat across the width of the plate, and the excess is metered or wiped so the surface is protected without becoming a slip hazard or fouling the next process. Film thickness and oil type are chosen with the customer: a shop primer for weeks of indoor storage is a different specification from a preservative for a sea freight.
What sets the specification
- Plate width and thickness — sets roller span, the oiling head width and the film control.
- Line speed — the oiling stage has to match the blast stage, or the line runs at the slower of the two.
- Protection period and conditions — indoor storage, outdoor yard or sea freight; each implies a different oil.
- What happens next — if the plate is to be welded or painted, the oil has to be removable or compatible.
Questions buyers ask
Related: roller conveyor blasting machines, which machine type fits your part.
What happens to the plate next?
Storage period, transport and the next process decide the oil — tell us those and we will specify the line.
Get a quote