All products Air handling · cartridge / baghouse

Dust Collector for Shot Blasting

A shot blasting machine moves a lot of air and puts dust into it — abrasive fines, paint and scale from the workpiece, and the very fine fraction that stays suspended longest. The collector is what keeps that out of the workshop, and it is sized by the machine, not chosen from a catalogue afterwards.

The number everything follows from

Each machine has a ventilation volume in its specification — the air it has to move to keep the chamber under negative pressure and the view clear. The collector has to handle that volume plus the ducting losses; a collector that is one size small shows up as dust escaping at the door seals, not as a filter problem.

Cartridge or baghouse

CartridgeCompact, high filtration efficiency, cleaned by pulse jet. The usual choice on a machine-mounted or indoor installation where floor space is tight.
BaghouseLarger filter area, tolerant of higher dust loading and of the fine, light dust that some workpieces produce. Better where air volume is high.
BothFiltration rating is chosen for the site: recirculating air indoors has a different requirement from discharging outdoors.

The dust is not the same on every job

Steel scale is heavy and settles. Aluminium produces fine, light dust that stays airborne and loads a filter differently. Blasting painted parts adds pigment and binder to the stream. A collector specified for one of these will run, and will clog or pass dust on another — which is why the workpiece material belongs in the specification, not just the air volume.

What sets the specification

  • Air volume of the machine — the figure in the machine specification, plus ducting runs.
  • Dust type — steel scale, aluminium fines, paint and coating residues.
  • Indoor or outdoor — recirculation indoors sets the filtration requirement and often the noise limit too.
  • Maintenance access — filter changes are a routine task; the collector has to be reachable without dismantling the line.

Questions buyers ask

Can I use my own dust collector?
Yes, if it handles the air volume and the dust type. Send the model and the filtration area and we will confirm it against the machine.
How often do filters need changing?
It follows the dust load, not the calendar. Differential pressure across the filter is the honest indicator — fit a gauge and change on the reading.
Does the collector come with the machine?
On a complete machine, extraction is sized with it and ships with it. On a line, ducting and siting are part of the layout.

Related: delivery, warranty and spare-parts questions, pipe internal and external blasting.

Send the machine and the dust

Air volume, workpiece material and where the air goes — that sizes the collector.

Get a quote

Related machines

Buyers weighing this machine usually compare it against these.