All Articles
Equipment GuideJuly 31, 2026

Roller Conveyor Shot Blasting Machines: Industrial-Scale Surface Preparation for Steel Plates & H-Beams

Complete technical reference for Q698–Q6940 roller conveyor blasting systems. Plate width analysis, multi-wheel abrasive coverage calculation, and integration with automated cutting and welding lines from Yufei Machinery.

Roller Conveyor Shot Blasting — Yufei

The Workhorse of Structural Steel Preparation

Roller conveyor shot blasting machines are the industry standard for continuous, high-volume surface preparation of long steel products — plates, H-beams, channels, angles, pipes, and profiles. Parts are fed through the machine on powered rollers, passing through a blast chamber where multiple high-power blast wheels clean all exposed surfaces in a single pass.

The Q69 series covers the demands of structural steel fabrication, shipbuilding and heavy engineering. Cleaning widths run from 800 mm on Q698 to 4,000 mm on Q6940, at conveyor speeds of 0.5–6 m/min. The arithmetic is simple and worth doing before you buy: width × speed gives the area rate, so Q6930 at 3,000 mm and 4 m/min moves 12 m² of plate a minute — the machine's ceiling is set by your crane and your loading rhythm, not by the belt.

Roller conveyor installationLarge roller conveyor

Model Range & Capacity

Related: which machine type fits your part, the mesh belt guide.

ModelCleaning Width (mm)Plate Thickness (mm)Shot Rate (kg/min)First Load (kg)Total Power (kW)
Q6988003–604 × 1602,00044
Q69121,2003–604 × 2502,50078.3
Q69151,5003–606 × 2503,000113.5
Q69202,0003–608 × 2503,500176.6
Q69252,5003–608 × 2504,000184.55
Q69303,0003–11012 × 2504,000204.8
Q69404,0004.5–10016 × 2504,500293.6

See the Q69 series in our roller conveyor shot blasting machine product page.

New Q69 model

Multi-Wheel Coverage: The Critical Design Factor

The number and positioning of blast wheels determines cleaning uniformity across the full plate width. Yufei's Q69-series uses a staggered wheel layout — wheels are offset both horizontally and vertically to eliminate "shadow zones" where adjacent wheel patterns leave untreated stripes.

A Q6925 runs eight blast wheels at 250 kg/min each, arranged above and below the conveyor so both faces of a plate are cleaned in one pass. Wheel count, not belt width, is what decides whether a machine keeps up: the same 2,500 mm width appears on Q6925 with eight wheels at 184.55 kW, and on Q6940 the width grows to 4,000 mm with sixteen wheels and 293.6 kW.

H-Beam & Profile Processing

Roller conveyor machines aren't limited to flat plate. With adjustable wheel positions and supplemental side-mounted blast wheels, Yufei's systems clean H-beams, I-beams, channels, and angles in a single pass. The conveyor's powered rollers handle the weight of heavy structural sections — Q6930 takes a first load of 4,000 kg and Q6940 up to 4,500 kg.

Custom roller conveyorProfile processing

Line Integration: From Blast to Fabrication

For steel service centers and fabrication shops, Yufei engineers complete inline systems:

  • Pre-heating station → removes moisture and light oil before blasting
  • Shot blasting machine → SA 2.5 surface preparation
  • Primer painting booth → automatic spray application of shop primer
  • Drying tunnel → accelerated curing for immediate handling
  • CNC cutting/plasma table → direct transfer to fabrication

This integrated approach eliminates material handling between processes, reduces labor costs, and ensures consistent surface quality from raw plate to finished fabrication.

Questions buyers ask about Q69 lines

What cleaning width and conveyor speed can I get?
Cleaning widths run from 800 mm on the Q698 up to 4,000 mm on the Q6940, at conveyor speeds of 0.5–6 m/min. Within that envelope the ceiling is set by your crane and your loading rhythm, not by the machine.
Why does wheel count matter more than plate width?
The same 2,500 mm width appears on the Q6925 with eight wheels at 184.55 kW, and on the Q6940 the width grows to 4,000 mm with sixteen wheels. Uniformity across a wide plate comes from staggered wheels offset both horizontally and vertically, which removes the shadow zones where adjacent wheel patterns would otherwise miss.
Can it clean H-beams and channels, not just flat plate?
Yes. Adjustable wheel positions plus supplemental side-mounted blast wheels clean H-beams, I-beams, channels and angles in a single pass, with wheels above and below the conveyor so both faces are done at once. The powered rollers carry the load: Q6930 takes a 4,000 kg first load and Q6940 up to 4,500 kg.
What do you need to quote a Q69 line?
Maximum plate width and thickness; profile types (H-beam, channel, angle, flat bar); required standard (SA 2.0, SA 2.5 or SA 3.0); target throughput in m² per shift or tons per day; and post-blast treatment — priming, cutting or welding.

Specifications Checklist

When requesting a Q69-series proposal, have these specifications ready:

  • Maximum plate width and thickness
  • Profile types to be processed (H-beam, channel, angle, flat bar)
  • Required cleaning standard (SA 2.0, SA 2.5, SA 3.0)
  • Target throughput in m² per shift or tons per day
  • Post-blast treatment requirements (priming, cutting, welding)
Request a Custom Proposal