Hook type machines

Model page

Q3710 — where the third wheel starts

Φ1500 × 1700 mm envelope, three turbines, a chamber 2 metres square and 2.5 metres high. The Q3710 is not a bigger Q378 — it is the point in the range where covering the part stops being a matter of rotating it past two wheels and starts needing a third angle.

Q3710 hook type shot blasting machine with overhead crane

Why 300 mm of height costs a wheel

Compare it with the Q378+: the same 1,500 mm diameter, 1,400 mm against 1,700 mm of height, two wheels against three. The extra 300 mm is not what the third wheel is for; the third wheel is what makes the extra 300 mm usable. Once the part is taller than the throw from a pair of roof-mounted turbines can reach, rotation alone cannot compensate — the bottom face passes through the same stream from the same direction every turn.

Put differently: below Φ1500 × 1400 you can choose either machine, depending on whether you want margin for future parts. Above 1,400 mm in height, the Q3710 is the smaller honest answer, and the Q3740 is the next one up at 3,200 mm.

Full specification

ParameterQ3710
Max product size (Φ × H)Φ1500 × 1700 mm
Blast turbines3
Screw conveyor power1.5 kW
Ventilation volume7,000 m³/h
Cleaning chamber L2,000 mm
Cleaning chamber W2,000 mm
Cleaning chamber H2,500 mm

Built to standard container dimensions. The Q3720 keeps the three-wheel layout and takes the envelope to Φ1700 × 2000 mm.

Where it earns its place

  • Tall castings and weldments — hoppers, frames, machine bases — where a two-wheel machine leaves the lower third under-treated.
  • Shops whose part mix has drifted upward over the years and who do not want to jump straight to a 4-wheel machine.
  • Work specified to SA 3.0, where the lower faces need a direct angle rather than a glancing pass.

Delivery, warranty and spare parts

  • Built to order — the delivery date is confirmed in the quotation.
  • Warranty 1–2 years depending on the application.
  • Blast wheels, blades and liners by air freight, about 7 days to most countries.
  • Payment 30% T/T with the order, 70% before shipment.

Questions about the Q3710

Three wheels — do they all run at once?

Yes. The layout is a coverage decision, not a staged process: the wheels are positioned so that each part of the rotating workpiece passes through a direct stream rather than relying on one wheel to reach everything.

How much abrasive does a third wheel cost me?

More circulation and more wear, in proportion to the extra wheel. That is why the ventilation volume rises from 5,000 to 7,000 m³/h and why we do not recommend the third wheel for parts that fit comfortably in a Q378.

Can the chamber be made taller without going to a Q3720?

The Q3720 adds both height and width (Φ1700 × 2000 mm). A one-off chamber height between the two is possible as a custom build — send the part envelope and we will say whether it is a modification or a different machine.

Related: the hook type range · Q378 — the largest two-wheel machine · Q3740 — Φ1500 × 3200

Other models in this range

Same machine type, different working envelope. Compare the first dimension against your largest part.